Share:
Crystal Clear 200

Crystal Clear 200

Clear Urethane Casting Resins

 For castings ½" - 3" (1.25 cm - 7.5 cm) thick.

$45.79 Trial Unit

In Stock
Qty:

Crystal Clear Series resins are water white clear and made specifically for applications that require absolute clarity. These rigid urethane casting resins differ only in working and demold times (see Technical Bulletin).  Low viscosity ensures easy mixing and pouring. Crystal Clear products cure at room temperature with negligible shrinkage. Cured castings are UV Resistant and are not brittle. Vibrant colors and color effects are achieved by adding SO-Strong color tints. Applications include encapsulation, making prototype models, lenses, sculpture reproductions, decorative cast pieces, jewelry, prototype models, special effects and props. Heat curing is essential to realize full physical properties.  Crystal Clear 220 has been certified for use as a lens material for DOT and FAA applications.


CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.


Related Products: